V-Ties

The integral link to make a mechanical connection between the masonry veneer and the back up wall.

BENEFITS OF V-TIES
  1. Will not rust
  2. Provides a mechanical link between veneer and connector plate.

Cat TieThe V-Tie™ is manufactured from 4.76 mm (0.19") diameter wire conforming to CSA Standard G30.3, and is available in hot dipped galvanized (conforming to CSA CAN3-A370 and ASTM A123 requirement of 458 g / m2 / side [1.5 oz / ft2 / side] of zinc coating), or stainless steel.

The legs of the V-Tie™ are mortared into place at the centerline of the brick veneer.

Ten V-Tie™ sizes are available to accommodate varying airspace and veneer width combinations. To determine the optimal V-Tie length - add 1/2 the veneer width plus the air space and insulation specified plus 6 mm = the optimal V-Tie size for your project.

All FERO connectors and accessories include complete documentation with descriptions, technical illustrations and images. Installation requirements and methods are clearly detailed.