The Slotted Stud Plate (Type II) specification length (S) refers to the actual width of the stud, the specification length (IG) refers to the actual thickness of the insulation plus membrane plus gypsum sheathing, and the specification length (P) refers to the length of projection of the Slotted Stud Plate (Type II) into the air space.

The V-Tie™ specification length (L) should be selected to provide for placement of the legs of the V-Tie™ at the centerline of brick veneer. The 80 mm (3.1") V-Tie™ is utilized in the Slotted Stud Tie (Type II) system consisting of 25 mm (1") air space and 90 mm (3.5") brick veneer. Other V-Tie™ sizes are: 60 (2.4"), 100 (3.9"), 120 (4.7"), 140 (5.5"), 160 (6.3"), 180 (7.1"), 200 (7.9"), 225 (8.9") and 250 (9.8") mm.

The Insulation Support is standard.