The Rap-Tie (Rod Adjustable Plate Tie) system consists of an L-Plate (a vertically orientated L-shaped plate), a V-Tie™ (a V-shaped wire), and an Insulation Support (optional). See Figures 1, 2 and 3.

Lateral loads applied to the brick veneer are transferred through the V-Tie™ to the L-Plate, which bears onto and is fastened to the structural backup wall as shown in Figures 4 and 5, for attachment directly to the steel studs and on top of the protected drywall, respectively. Note that "protected drywall" is defined by CSA Standard CAN3-A370 "Connectors for Masonry", ACI/ASCE/TMS/518 and U.B.C. The holes in the exterior end of the L-Plate through which the V-Tie™ is placed provide a positive connection while allowing for up to 36 mm (1.4") of vertical adjustability to the V-Tie™ placement during construction.

The Insulation Support is optionally used to securely fix the insulation sheathing in place.